Display Dhcp Server Ip-In-Use - HP A5120 EI Series Command Reference Manual

Table 6 Output description
Field
Global
Pool name

display dhcp server ip-in-use

Syntax
display dhcp server ip-in-use { all | ip ip-address | pool [ pool-name ] } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays the binding information of all DHCP address pools.
ip ip-address: Displays the binding information of a specified IP address.
pool [ pool-name ]: Displays the binding information of a specified address pool. The pool name is a
string of 1 to 35 characters. If no pool name is specified, the binding information of all address pools is
displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display dhcp server ip-in-use command to display the binding information of DHCP address
pool(s) or an IP address.
Related commands: reset dhcp server ip-in-use.
Examples
# Display the binding information of all DHCP address pools.
<Sysname> display dhcp server ip-in-use all
Pool utilization: 0.39%
IP address
10.1.1.1
10.1.1.2
Description
Globally excluded IP addresses specified with the dhcp server forbidden-ip command in
system view. No address pool can assign these IP addresses.
Excluded IP addresses specified with the forbidden-ip command in DHCP address pool
view. They cannot be assigned from the current extended address pool only.
Client-identifier/
Hardware address
4444-4444-4444
3030-3030-2e30-3030-
Lease expiration
NOT Used
May 1 2009 14:02:49
31
Type
Manual
Auto:COMMITTED