Step 2 Connect the USB Cable
1
Make sure that the machine is turned on.
Connect the USB cable after MF Toolbox installation.
2
Connect the USB cable to the machine and computer USB port.
When you connect the USB cable to the computer, the machine is automatically
detected as a new hardware. Wait for a while as your computer performs various
settings.
Depending on your computer, a message may display asking you to restart your
computer.
After restarting your computer, wait for a while for your computer to continue
performing various settings.
Install Accompanying Applications
If you do not select the accompanying applications, you can install them later, in the
[MF8100 Series Setup] screen, click [Additional Software Program].
Read User's Manual
To read the PDF manual on the CD-ROM, click [Display Manuals] on the [MF8100
Series Setup] screen.
Installation is now complete. In the [MF8100 Series Setup] screen, click [Exit] to
close the screen. Then remove the CD-ROM from the disk drive.
Installing Software on Your Computer
1
1-11