Setting Cross Cursor Length And Fixing Cursor Position - JRC JMA-7710-6 Instruction Manual

3.3.17

Setting Cross Cursor Length and Fixing Cursor Position

This function is used to set the length of the cross cursor or to select the mode for fixing the cursor.
To set the length of the cross cursor
1. Press the
Procedures
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
Exit 7. Press the
Exit
Cursor
CURSOR
1. CURSOR LENGTH
2. FIXED CURSOR
SUB
to open the SUB MENU.
MENU
2
key to open the RADAR #2 menu.
5
key to open the CURSOR menu.
1
key to select "CURSOR LENGTH".
1
key to select "SHORT" or "LONG".
ENT
key to confirm the setting.
SUB
key.
MENU
SHORT LONG
X/Y AXIS X AXIS
3 – 34
0. PREV
Y AXIS
3.3
3