Monitor Cli Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

width
Syntax width width
Context environment>terminal
Description
This command determines display terminal width.
Default
80 — Terminal dimensions are set to 24 lines long by 80 characters wide.
Parameters width — Sets the width of the display terminal.
time-display
Syntax time-display {local | utc}
Context environment
Description
This command displays time stamps in the CLI session based on local time or Coordinated Universal
Time (UTC).
The system keeps time internally in UTC and is capable of displaying the time in either UTC or local
time based on the time zone configured.
This configuration command is only valid for times displayed in the current CLI session. This includes
displays of event logs, traps and all other places where a time stamp is displayed.
In general all time stamps are shown in the time selected. This includes log entries destined for console/
session, memory, or SNMP logs. Log files on compact flash are maintained and displayed in UTC
format.
Default
time-display local — Displays time stamps based on the local time.

Monitor CLI Commands

card
Syntax card slot-number fp fp-number ingress {access | network} queue-group queue-group-
name instance instance-id [interval seconds] [repeat repeat] policer policer-id [absolute |
percent-rate | reference-rate]
Context monitor
Description This command monitors policer statistics in an ingress FP queue group.
Basic System Configuration Guide
Values
1 to 512
CLI Usage
83