Alcatel-Lucent 7450 Basic System Configuration Manual page 143

port-id — Specifies the physical port ID in the slot/mda/port, esat-id/slot/port or pxc-id.sub-port
bundle-id — Specifies the multilink bundle to be associated with this IP interface. The bundle
Basic System Configuration Guide
aps
group-id
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag
id
path-id
cc-type
cc-id
eth-tunnel eth-tunnel-id[:eth-tun-sap-id]
id
eth-tun-sap-id
lag-id lag-id
lag
id
pw-id pw-id
pw
id
qtag1 * | 0 to 4094
qtag2 * | null | 0 to 4094
vpi 0 to 4095 (NNI)
0 to 255 (UNI)
vci 1 | 2 | 5 to 65535
dlci 16 to 1022
tunnel-id tunnel-id.private | public:tag
tunnel
id
tag
format.
If the card in the slot has XMAs/MDAs installed, the port-id must be in the slot_number/
MDA_number/port_number format. For example 6/2/3 specifies port 3 on XMA/MDA 2 in
slot 6.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period "." separates the
physical port from the channel-id. The port must be configured as an access port. Channels
are supported on the 7750 SR.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
keyword must be entered at the beginning of the parameter. This parameter applies to the
7750 SR.
CLI Usage
keyword
1 to 128
keyword
1 to 8
a | b
.sap-net | .net-sap
1 to 4094
1 to 1024
0 to 4094
keyword
1 to 800
keyword
1 to 10239
keyword
1 to 16
0 to 4094
143