Alcatel-Lucent 7450 Basic System Configuration Manual page 387

Parameters number — The number of times the schedule is run.
day-of-month
Syntax day-of-month {day-number [..day-number] all}
no day-of-month
Context config>system>cron>sched
Description
This command specifies which days of the month that the schedule will occur. Multiple days of the
month can be specified. When multiple days are configured, each of them will cause the schedule to
trigger. If a day-of-month is configured without configuring month, weekday,
event will not execute.
Using the weekday command as well as the day-of-month command will cause the script to run twice.
For example, consider that today is Monday January 1. If Tuesday January 5 is configured, the script
will run on Tuesday (tomorrow) as well as January 5 (Friday).
The no form of this command removes the specified day-of-month from the list.
Parameters day-number — The positive integers specify the day of the month counting from the first of the
all — Specifies all days of the month.
end-time
Syntax end-time [date | day-name] time
no end-time
Context config>system>cron>sched
Description This command is used concurrently with type periodic or calendar. Using the type of periodic, end-
time determines at which interval the schedule will end. Using the type of calendar, end-time
determines on which date the schedule will end.
When no end-time is specified, the schedule runs forever.
Basic System Configuration Guide
Values
1 to 65535
Default 65535
month. The negative integers specify the day of the month counting from the last day of the
month. For example, configuring day-of-month -5, 5 in a month that has 31 days will specify
the schedule to occur on the 27th and 5th of that month.
Integer values must map to a valid day for the month in question. For example, February 30
is not a valid date.
Values 1 to 31, -31 to -1 (maximum 62 day-numbers)
System Management
hour and minute, the
387