Alcatel-Lucent 7450 Basic System Configuration Manual page 528

Show, Clear, Debug, and Tools Command Reference
Sample Output
The following system example shows:
528
Table 70: System Timing Output (Continued)
Label
Not Qualified Due To
Selected for Use
Not Selected Due To
Source Port
Interface Type
Framing
Line Coding
Line Length
Output Admin Status
Output Source
Output Reference
Selected
TX Quality Level
• sync-if timing, or
Description (Continued)
Indicates the reason why the reference has not been qualified:
• disabled
• LOS
• OOPIR
• OOF
Indicates whether the method is presently selected.
Indicates the reason why the method is not selected:
• disabled
• not qualified
• previous failure
• LOF
• AIS-L
• validating
• on standby
• ssm quality
Identifies the Source port for the reference.
The interface type configured for the BITS port.
The framing configured for the BITS port.
The line coding configured for the BITS port.
The line length value of the BITS output.
down — The BITS output is administratively shutdown.
up — The BITS output is administratively enabled.
The source to be used to provide the signal on the BITS output port.
line reference — unfiltered recovered line reference.
internal clock — filtered node clock output.
The reference selected as the source for the BITS output signal (ref1, ref2,
or PTP).
QL value for BITS output signal.
Basic System Configuration Guide