Alcatel-Lucent 7450 Basic System Configuration Manual page 505

statistics
Syntax statistics mc-lag [peer ip-address [lag lag-id]]
Context show>redundancy>multi-chassis>mc-lag
Description
This command displays multi-chassis statistics.
Parameters
mc-lag — Displays multi-chassis LAG statistics.
peer ip-address — Shows the specified address of the multi-chassis peer.
lag lag-id — Shows information for the specified LAG identifier.
Output The following table describes show redundancy multi-chassis mc-lag peer output fields:
Basic System Configuration Guide
Values
1 to 800
Table 58: Redundancy Multi-chassis MC-Lag Peer Statistics Field Descriptions
Label
Packets Rx
Packets Rx
Keepalive
Packets Rx Config
Packets Rx Peer
Config
Packets Rx State
Packets Dropped State
Disabled
Packets Dropped
Packets Too Short
Packets Dropped Tlv
Invalid Size
Packets Dropped Tlv
Invalid LagId
Packets Dropped Out
of Seq
Packets Dropped
Unknown Tlv
Description
Indicates the number of MC-Lag packets received from the peer.
Indicates the number of MC-Lag keepalive packets received from the
peer.
Indicates the number of received MC-Lag configured packets from the
peer.
Indicates the number of received MC-Lag packets configured by the peer.
Indicates the number of MC-Lag "lag" state packets received from the
peer.
Indicates the number of packets that were dropped because the peer was
administratively disabled.
Indicates the number of packets that were dropped because the packet
was too short.
Indicates the number of packets that were dropped because the packet
size was invalid.
Indicates the number of packets that were dropped because the packet
referred to an invalid or non multi-chassis lag.
Indicates the number of packets that were dropped because the packet
size was out of sequence.
Indicates the number of packets that were dropped because the packet
contained an unknown TLV.
System Management
505