Alcatel-Lucent 7450 Basic System Configuration Manual page 448

System Command Reference
interval
Syntax interval interval
no interval
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description
This command specifies the polling interval of the ring-node connectivity verification of this ring
node.
Default
5
Parameters
interval — Specifies the polling interval, in minutes.
service-id
Syntax service-id service-id
no service-id
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description
This command specifies the service ID of the SAP used for the ring-node connectivity verification of
this ring node.
Default
no service-id
Parameters
service-id — Specifies the service ID of the SAP.
src-ip
Syntax src-ip ip-address
no src-ip
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description
This command specifies the source IP address used in the ring-node connectivity verification of this
ring node.
Default no src-ip
Parameters
ip-address — Specifies the address of the multi-chassis peer.
448
Values 1 to 6000
Values 1 to 2147483647
Basic System Configuration Guide