Alcatel-Lucent 7450 Basic System Configuration Manual page 389

no minute
Context config>system>cron>sched
Description This command specifies the minute to schedule a command. Multiple minutes of the hour can be
specified. When multiple minutes are configured, each of them will cause the schedule to occur. If a
minute is configured, but no hour or day is configured, the event will not execute. If a minute is
configured without configuring month, weekday, day-of-month, and hour, the event will not execute.
The no form of this command removes the specified minute from the configuration.
Parameters
minute-number — Specifies the minute to schedule a command.
all — Specifies all minutes.
month
Syntax month {month-number [..month-number] | month-name [..month-name] | all}
no month
Context config>system>cron>sched
Description This command specifies the month when the event should be executed. Multiple months can be
specified. When multiple months are configured, each of them will cause the schedule to trigger. If a
month is configured without configuring weekday, day-of-month,
execute.
The no form of this command removes the specified month from the configuration.
Parameters
month-number — Specifies a month number.
all — Specifies all months.
month-name — Specifies a month by name
type
Syntax type {schedule-type}
Context config>system>cron>sched
Description
This command specifies how the system should interpret the commands contained within the schedule
node.
Basic System Configuration Guide
Values 0 to 59 (maximum 60 minute-numbers)
Values 1 —12 (maximum 12 month-numbers)
Values
january, february, march, april, may, june, july, august,
september, october, november, december (maximum 12 month
names).
System Management
hour and minute, the event will not
389