Alcatel-Lucent 7450 Basic System Configuration Manual page 445

Multi-Chassis Ring Commands
mc-ring
Syntax mc-ring
Context config>redundancy>mc>peer
config>redundancy>multi-chassis>peer>sync
Description This command enables the context to configure the multi-chassis ring parameters.
ring
Syntax ring sync-tag
no ring sync-tag
Context config>redundancy>mc>peer>mcr
Description
This command configures a multi-chassis ring.
Parameters
sync-tag — Specifies a synchronization tag to be used while synchronizing this port with the
in-band-control-path
Syntax in-band-control-path
Context config>redundancy>mc>peer>mcr>ring
Description This command enables the context to configure multi-chassis ring inband control path parameters.
dst-ip
Syntax dst-ip ip-address
no dst-ip
Context config>redundancy>mc>peer>mcr>ring>in-band-control-path
Description
This command specifies the destination IP address used in the inband control connection. If the address
is not configured, the ring cannot become operational.
Parameters ip-address — Specifies the destination IP address.
Basic System Configuration Guide
multi-chassis peer.
System Management
445