Alcatel-Lucent 7450 Basic System Configuration Manual page 128

Basic CLI Command Reference
[absolute | rate]
Context monitor>router>mpls
Description This command displays ingress statistics for LSP interfaces at the configured interval until the
configured count is reached.
Parameters
repeat repeat — Specifies how many times the command is repeated.
interval seconds — Specifies the interval for each display, in seconds.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
Output
Sample Output
B:Dut-C-cpm2# monitor router mpls lsp-ingress-stats lsp sample 1.1.1.1 repeat 3
interval 10 absolute
===============================================================================
Monitor ingress statistics for MPLS LSP "sample"
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
LSP Name
Sender
-------------------------------------------------------------------------------
Collect Stats : Enabled
Adm State
FC BE
InProf Pkts
InProf Octets : 548702
FC L2
InProf Pkts
InProf Octets : 0
FC AF
InProf Pkts
InProf Octets : 0
FC L1
InProf Pkts
InProf Octets : 1097404
FC H2
InProf Pkts
InProf Octets : 0
FC EF
InProf Pkts
InProf Octets : 548702
128
Values 10
Values
1 to 999
Values
10
Values 3 to 60
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
: sample
: 1.1.1.1
: Up
: 539
: 0
: 0
: 1078
: 0
: 539
Accting Plcy. : None
PSB Match : True
OutProf Pkts : 0
OutProf Octets: 0
OutProf Pkts : 539
OutProf Octets: 548702
OutProf Pkts : 0
OutProf Octets: 0
OutProf Pkts : 0
OutProf Octets: 0
OutProf Pkts : 539
OutProf Octets: 548702
OutProf Pkts : 0
OutProf Octets: 0
Basic System Configuration Guide