Alcatel-Lucent 7450 Basic System Configuration Manual page 17

Display the list of all system global commands by entering help globals in the CLI:
*A:ALA-12>config>service# help globals
back
*A:ALA-12>config>service#
Basic System Configuration Guide
Table 2: Console Control Commands (Continued)
Command Description
password Changes the user CLI login password. The password can only be
changed at the ROOT level.
ping Verifies the reachability of a remote host.
pwc Displays the present or previous working context of the CLI session.
sleep Causes the console session to pause operation (sleep) for one second or
for the specified number of seconds. Primary use is to introduce a pause
within the execution of an exec file.
ssh Opens a secure shell connection to a host.
telnet Telnet to a host.
traceroute Determines the route to a destination address.
tree Displays a list of all commands at the current level and all sublevels.
write Sends a console message to a specific user or to all users with active
console sessions.
- Go back a level in the command tree
echo
enable-admin
exec
exit
help
history
info
logout
mrinfo
mstat
mtrace
oam
ping
pwc
sleep
ssh
telnet
traceroute
tree
write
- Echo the text that is typed in
- Enable the user to become a system administrator
- Execute a file - use -echo to show the commands and
prompts on the screen
- Exit to intermediate mode - use option all to exit to
root prompt
- Display help
- Show command history
- Display configuration for the present node
- Log off this system
- Request multicast router information
- Trace multicast path from a source to a receiver and
display multicast packet rate and loss information
- Trace multicast path from a source to a receiver
+ OAM Test Suite
- Verify the reachability of a remote host
- Show the present working context
- Sleep for specified number of seconds
- SSH to a host
- Telnet to a host
- Determine the route to a destination address
- Display command tree structure from the context of
execution
- Write text to another user
CLI Usage
17