Alcatel-Lucent 7450 Basic System Configuration Manual page 81

Description This command enables per-screen CLI output, meaning that the output is displayed on a screen-by-
screen basis. The terminal screen length can be modified with the terminal command.
The following prompt appears at the end of each screen of paginated output:
Press any key to continue (Q to quit)
The no form of the command displays the output all at once. If the output length is longer than one
screen, the entire output will be displayed, which may scroll the screen.
Default
more — CLI output pauses at the end of each screen waiting for the user input to continue.
reduced-prompt
Syntax reduced-prompt [number of nodes in prompt]
no reduced-prompt
Context environment
Description
This command configures the maximum number of higher CLI context levels to display in the CLI
prompt for the current CLI session. This command is useful when configuring features that are several
node levels deep, causing the CLI prompt to become too long.
By default, the CLI prompt displays the system name and the complete context in the CLI.
The number of nodes specified indicates the number of higher-level contexts that can be displayed in
the prompt. For example, if reduced prompt is set to 2, the two highest contexts from the present
working context are displayed by name with the hidden (reduced) contexts compressed into a ellipsis
("...").
A:ALA-1>environment# reduced-prompt 2
A:ALA-1>vonfig>router# interface to-103
A:ALA-1>...router>if#
The setting is not saved in the configuration. It must be reset for each CLI session or stored in an exec
script file.
The no form of the command reverts to the default.
Default no reduced-prompt — Displays all context nodes in the CLI prompt.
Parameters
number of nodes in prompt — The maximum number of higher-level nodes displayed by name in
Basic System Configuration Guide
the prompt, expressed as a decimal integer.
Default 2
Values
0 to 15
CLI Usage
81