System Information Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

Context config>system>cron>sched
config>system>script-control>script
config>system>persistence>ancp
config>system>persistence>app-assure
config>system>persistence>dhcp-server
config>system>persistence>nat-fwd
config>system>persistence>sub-mgmt
config>system>persistence>dhcp-server
config>redundancy>multi-chassis>peer
Description
This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of this command removes the string from the configuration.
Default No description associated with the configuration context.
Parameters
string — The description character string. Allowed values are any string up to 80 characters long

System Information Commands

atm
Syntax atm
Context config>system
Description This command enables the context to configure system-wide ATM parameters and only apply to the
7750 SR.
atm-location-id
Syntax atm-location-id location-id
Context config>system
Description
This command indicates the location ID for ATM OAM and only applies to the 7750 SR.
Refer to the 7750 SR Services Guide for information about ATM QoS policies and ATM-related
service parameters.
Default
no atm-location-id
Basic System Configuration Guide
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
System Management
337