Environment Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

Basic CLI Command Reference

Environment Commands

<root>
60
— neighbor
[absolute | rate]
— virtual-link
rate]
— virtual-neighbor
| rate]
— pim
— group grp-ip-address [source ip-address] [interval seconds] [repeat repeat]
[absolute | rate]
— rip
— neighbor
[absolute | rate]
— rsvp
— interface
[absolute | rate]
— vrrp
— instance
repeat] [absolute | rate]
— service
— id service-id
— sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
— sdp sdp-id [far-end] ip-address [interval seconds] [repeat repeat] [absolute | rate]
— subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [base | ingress-queue-id
ingress-queue-id | egress-queue-id egress-queue-id] [interval seconds] [repeat repeat]
[absolute | rate]
— environment
— alias alias-name alias-command-name
— no alias alias-name
— [no] create
— [no] more
— reduced-prompt
— no reduced-prompt
— [no] saved-ind-prompt
— suggest-internal-objects
— terminal
— length lines
— width width
— time-display {local | utc}
ip-address [ip-address...(up to 5 max)] [interval seconds] [repeat repeat]
nbr-rtr-id area area-id [interval seconds] [repeat repeat] [absolute |
nbr-rtr-id area area-id [interval seconds] [repeat repeat] [absolute
neighbor [neighbor...(up to 5 max)] [interval seconds] [repeat repeat]
interface [interface...(up to 5 max)] [interval seconds] [repeat repeat]
interface interface-name vr-id virtual-router-id [interval seconds] [repeat
[no. of nodes in prompt]
Basic System Configuration Guide