Rollback Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

Last commit state
Last commit time
Checkpoint created with last commit
Scheduled revert time
Last commit revert time
===============================================================================
Users in edit-cfg mode
===============================================================================
Username
===============================================================================
admin
Joris
===============================================================================

Rollback Commands

compare
Syntax compare [to source2]
compare source1 to source2
Context admin
admin>rollback
config>xx (where xx is any sub-branch at any level below config, but not at the config context
itself)
Description
This command displays the differences between rollback checkpoints and the active operational
configuration, with source1 as the base/first file to which source2 is compared.
A compare operation does not check authorization of each line of output. Permission to execute the
compare operation from the admin branch of CLI (authorization for the admin rollback compare or
admin compare command itself) should only be given to users who are allowed to view the entire
configuration, similar to permissions for admin display-config.
Default
The defaults for source1 and source2 are context aware and differ based on the branch in which the
command is executed. In general, the default for source1 matches the context from which the
command is issued.
Basic System Configuration Guide
Type (from)
Console
Telnet (172.31.117.239)
• In the admin node: No defaults. source1 and source2 must be specified.
• In the admin>rollback node:
source1 default = active-cfg, source2 default = lastest-rb
compare: Equivalent to "compare active-cfg to lastest-rb"
compare to source2:Equivalent to "compare active-cfg to source2"
• In a config>xx node:
compare to source2: Equivalent to "compare active-cfg to source2"
: revert-failed
: 10/23/2012 17:21:47
: yes
: N/A
: 10/23/2012 17:22:47
CLI Usage
161