Configuration Notes - Alcatel-Lucent 7450 Basic System Configuration Manual

Ethernet service switch /service router /extensible routing system

Hide thumbs Also See for 7450:

Table of Contents

Configuration Notes

INSERT FLASH CARD INTO COMPACT FLASH SLOT #3

Configuration Notes

This section describes BOF configuration caveats.

Figure 10: System Startup Flow

POWER CYCLE ROUTER

BOOT.LDR FILES FOUND

BOF FILES FOUND

ESTABLISH ROUTER CONNECTION (CONSOLE PORT)

ASSIGN IP ADDRESS TO THE CPM

CONFIGURE/MODIFY BOF FILE LOCATIONS

SAVE CONFIG CHANGES

For router initialization, the compact flash card must be installed in the Compact

Flash #3 slot.

The loading sequence is based on the order in which it is placed in the configuration

file. It is loaded as it is read in at boot time.

PRIMARY IMAGE

PRIMARY CONFIG

SECONDARY IMAGE

SECONDARY CONFIG

TERTIARY IMAGE

TERTIARY CONFIG

Basic System Configuration Guide