Basic CLI Command Reference
Bad Dead Int.
Bad Versions
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Tot Rx Packets : 0
Rx Hellos
Rx DBDs
Rx LSRs
Rx LSUs
Rx LS Acks
Retransmits
Bad Networks
Bad Areas
Bad Auth Types : 0
Bad Neighbors
Bad Lengths
Bad Dead Int.
Bad Versions
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Tot Rx Packets : 0
Rx Hellos
Rx DBDs
Rx LSRs
Rx LSUs
Rx LS Acks
Retransmits
Bad Networks
Bad Areas
Bad Auth Types : 0
Bad Neighbors
Bad Lengths
Bad Dead Int.
Bad Versions
===============================================================================
A:ALA-12>monitor>router>ospf#
neighbor
Syntax
neighbor ip-address [ip-address...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
Context
monitor>router>ospf
Description
This command displays statistical OSPF or OSPF3 neighbor information at the configured interval
until the configured count is reached. This command is supported on the 7750 SR and 7950 XRS.
The first screen displays the current statistics related to the specified OSPF neighbor(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the
delta.
134
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Bad Options
: 0
Tot Tx Packets : 0
Tx Hellos
: 0
Tx DBDs
: 0
Tx LSRs
: 0
Tx LSUs
: 0
Tx LS Acks
: 0
Discards
: 0
Bad Virt Links : 0
Bad Dest Addrs : 0
Auth Failures
: 0
Bad Pkt Types
: 0
Bad Hello Int. : 0
Bad Options
: 0
Tot Tx Packets : 0
Tx Hellos
: 0
Tx DBDs
: 0
Tx LSRs
: 0
Tx LSUs
: 0
Tx LS Acks
: 0
Discards
: 0
Bad Virt Links : 0
Bad Dest Addrs : 0
Auth Failures
: 0
Bad Pkt Types
: 0
Bad Hello Int. : 0
Bad Options
: 0
Basic System Configuration Guide