Alcatel-Lucent 7450 Basic System Configuration Manual page 89
Ethernet service switch /service router /extensible routing system
Hide thumbs
Also See for 7450:
- Quality of service manual (912 pages) ,
- Manual (816 pages) ,
- Configuration manual (778 pages)
Table of Contents
Advertisement
Ing. Matches: 0
---------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0
---------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0
---------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
---------------------------------------------------------------------------
Ing. Matches: 0
===========================================================================
A:ALA-1>monitor#
ipv6
Syntax
ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>filter
Description
This command enables IPv6 filter monitoring. The statistical information for the specified IPv6 filter
entry displays at the configured interval until the configured count is reached. This command applies
to the 7750 SR and 7950 XRS.
The first screen displays the current statistics related to the specified IPv6 filter. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
iv6p-filter-id — Displays detailed information for the specified IPv6 filter ID and its filter entries.
entry entry-id — Displays information on the specified IPv6 filter entry ID for the specified filter
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
Basic System Configuration Guide
Values
1 to 65535
ID only.
Values
1 to 65535
Default
5 seconds
Values
3 to 60
Default
10
Values
1 to 999
Egr. Matches
: 0
Egr. Matches
: 0
Egr. Matches
: 0
Egr. Matches
: 0
CLI Usage
89
Advertisement
Table of Contents
