Alcatel-Lucent 7450 Basic System Configuration Manual page 367

cflash-cap-warn-pct
Syntax cflash-cap-warn-pct cflash-id rising-threshold threshold [falling-threshold threshold]
interval seconds [rmon-event-type rmon-event-type] [startup-alarm alarm-type]
no cflash-cap-warn-pct cflash-id
Context config>system>thresholds
Description This command enables capacity monitoring of the compact flash specified in this command. The usage
is monitored as a percentage of the capacity of the compact flash.
command removes the configured compact flash threshold warning.
Parameters
cflash-id — The cflash-id specifies the name of the cflash device to be monitored.
rising-threshold threshold — Specifies a threshold for the sampled statistic. When the current
falling-threshold threshold — Specifies a threshold for the sampled statistic. When the current
seconds — Specifies the polling period over which the data is sampled and compared with the
Basic System Configuration Guide
The severity level is warning. Both a rising and falling threshold can be specified. The no form of this
Values
cf1:, cf1-A:,cf1-B:,cf2:,cf2-A:,cf2-B:,cf3:,cf3-A:,cf3-B:
sampled value is greater than or equal to this threshold, and the value at the last sampling
interval was less than this threshold, a single threshold crossing event will be generated. A
single threshold crossing event will also be generated if the first sample taken is greater than
or equal to this threshold and the associated startup-alarm is equal to rising or either.
After a rising threshold crossing event is generated, another such event will not be generated
until the sampled value falls below this threshold and reaches less than or equal to the falling-
threshold value.
The threshold value is the percentage of used space versus capacity for the specified compact
flash.
Values 0 to 100
Default
0
sampled value is less than or equal to this threshold, and the value at the last sampling interval
was greater than this threshold, a single threshold crossing event will be generated. A single
threshold crossing event will also be generated if the first sample taken is less than or equal
to this threshold and the associated startup-alarm is equal to falling or either.
After a falling threshold crossing event is generated, another such event will not be generated
until the sampled value rises above this threshold and reaches greater than or equal to the
rising-threshold value.
The threshold value is the percentage of used space versus capacity for the specified compact
flash.
Values 0 to 100
Default
0
rising and falling thresholds.
Values
1 to 2147483647
System Management
367