Alcatel-Lucent 7450 Basic System Configuration Manual page 165

Default None. A valid rollback-location must be configured before a rollback save is executed.
Parameters
file-url — Specifies the URL.
rollback-filename — Specifies the rollback file name.
rescue-location
Syntax no rescue-location file-url
Context config>system>rollback
Description The location and filename of the rescue configuration is configurable to be local (on compact flash) or
remote. The suffix .rc will be automatically appended to the filename when a rescue configuration file
is saved. Trivial FTP (TFTP) is not supported for remote locations.
Default None. A valid rescue location must be configured before a rescue configuration is saved.
Parameters
file-url — Specifies the URL.
Basic System Configuration Guide
Values
local-url | remote-url
local-url
remote-url
remote-locn
ipv4-address
ipv6-address
cflash-id
Values
Suffixed with .rb, .rb.1 up to .9 during rollback checkpoint
creation
Values
local-url | remote-url
local-url
remote-url
remote-locn
[cflash-id/][file-path] 200 chars max, including flash-id directory length 99
chars max each
[{ftp://}login:pswd@ remote-locn/][file-path] 255 chars max directory
length 99 chars max each
[hostname | ipv4-address | ipv6-address]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:| cf3:|cf3-A:|cf3-B:
[cflash-id/][file-path] 200 chars max, including flash-id directory length 99
chars max each
[{ftp://}login:pswd@ remote-locn/][file-path] 255 chars max directory
length 99 chars max each
[hostname | ipv4-address | ipv6-address]
CLI Usage
165