System Synchronization Configuration Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

System Command Reference

System Synchronization Configuration Commands

sync-if-timing
Syntax sync-if-timing
Context config>system>
Description
This command creates or edits the context to create or modify timing reference parameters.
Default
Disabled
abort
Syntax abort
Context config>system>sync-if-timing
Description
This command is required to discard changes that have been made to the synchronous interface timing
configuration during a session.
Default No default
begin
Syntax begin
Context config>system>sync-if-timing
Description This command is required in order to enter the mode to create or edit the system synchronous interface
timing configuration.
Default
No default
bits
Syntax bits
Context config>system>sync-if-timing
Description This command enables the context to configure parameters for the Building Integrated Timing Supply
(BITS). The settings specified under this context apply to both the BITS input and BITS output ports
and to both the bits1 and bits2 ports on the 7750 SR-c4.
398 Basic System Configuration Guide