Alcatel-Lucent 7450 Basic System Configuration Manual page 438

System Command Reference
Default no python
range
Syntax range encap-range sync-tag sync-tag
no range encap-range
Context config>redundancy>multi-chassis>peer>sync>port
Description
This command configures a range of encapsulation values.
Parameters
encap-range — Specifies a range of encapsulation values on a port to be synchronized with a
sync-tag sync-tag — Specifies a synchronization tag up to 32 characters in length to be used
source-address
Syntax source-address ip-address
no source-address
Context config>redundancy>multi-chassis>peer
Description
This command specifies the source address used to communicate with the multi-chassis peer.
Parameters
ip-address — Specifies the source address used to communicate with the multi-chassis peer.
srrp
Syntax [no] srrp
Context config>redundancy>multi-chassis>peer>sync
Description
This command specifies whether subscriber routed redundancy protocol (SRRP) information should
be synchronized with the multi-chassis peer. This command applies to the 7450 ESS and 7750 SR.
Default
no srrp
sync
Syntax [no] sync
438
multi-chassis peer.
Values
Dot1Qstart-vlan-end-vlan
QinQQ1.start-vlan-Q1.end-vlan
while synchronizing this encapsulation value range with the multi-chassis peer.
Basic System Configuration Guide