Alcatel-Lucent 7450 Basic System Configuration Manual page 139

absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
group
Syntax group grp-ip-address [source ip-address] [interval interval] [repeat repeat] [absolute | rate]
Context monitor>router>pim
Description
This command monitors statistics for a PIM source group.
Parameters
grp-ip-address — The IP address of an multicast group that identifies a set of recipients that are
source ip-address — The source IP address to use in the ping requests in dotted decimal notation.
interval interval — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
neighbor
Syntax neighbor neighbor [neighbor...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context monitor>router>rip
Description
This command displays statistical RIP neighbor information at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the specified RIP neighbor(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Basic System Configuration Guide
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
interested in a particular data stream.
Default The IP address of the egress IP interface.
Values
0.0.0.0 to 255.255.255.255
Default
10 seconds
Values 10 | 20 | 30 | 40 | 50 | 60
Default 10
Values
1 to 999
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
CLI Usage
139