Alcatel-Lucent 7450 Basic System Configuration Manual page 96

Basic CLI Command Reference
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
port
Syntax port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
[multiclass]
Context monitor
Description This command enables port traffic monitoring. The specified port(s) statistical information displays at
the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified port(s). The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
When the rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
port port-id — Specify up to 5 port IDs. Port-IDs are only MLPPP bundles or bundle protection
96
instead of the delta.
groups when the multiclass is specified.
Syntax:
port-id slot/mda/port [.channel]
eth-sat-id
pxc-id
aps-id
bundle ID
esat-id/slot/port
esat
id
pxc-id.sub-port
pxc
id
sub-port
aps-group-id[.channel]
aps
group-id
bundle-type-slot/mda.bundle-num
bundle
type
bundle-num
Basic System Configuration Guide
keyword
1 to 20
keyword
1 to 64
a, b
keyword
1 to 64 (16 for 7750 SR-c12 and
7750 SR-c4)
keyword
ima, ppp
1 to 128 (16 for 7750 SR-c12
and 7750 SR-c4)