Alcatel-Lucent 7450 Basic System Configuration Manual page 297

Acronym
AWST
ACST
AEST
NZT
NZDT
Summer Time Conditions
The config>system>time>dst-zone context configures the start and end dates and offset for
summer time or daylight savings time to override system defaults or for user defined time
zones.
When configured, the time will be adjusted by adding the configured offset when summer
time starts and subtracting the configured offset when summer time ends.
CLI Syntax:
Example:
If the time zone configured is listed in
offset do not need to be configured with this command unless there is a need to override the
system defaults. The command will return an error if the start and ending dates and times are
not available either in
The following example displays the configured parameters.
A:ALA-48>config>system>time>dst-zone# info
----------------------------------------------
Basic System Configuration Guide
Table 39: System-defined Time Zones (Continued)
Time Zone Name
Western Standard Time (e.g., Perth)
Central Standard Time (e.g., Darwin)
Eastern Standard/Summer Time (e.g.,
Canberra)
New Zealand Standard Time
New Zealand Daylight Saving Time
config>system>time
dst-zone zone-name
end {end-week} {end-day} {end-month} [hours-
offset offset
start {start-week} {start-day} {start-month}
config>system# time
config>system>time# dst-zone pt
config>system>time>dst-zone# start second sunday april
02:00
end first sunday october 02:00
config>system>time>dst-zone# offset 0
Table 39
UTC Offset
UTC +8 hours
UTC +9.5 hours
UTC +10 hours
UTC +12 hours
UTC +13 hours
minutes]
[hours-minutes]
Table 39, then the starting and ending parameters and
or entered as optional parameters in this command.
System Management
297