Basic CLI Command Reference
Bad Packets
Option Mismatches: 0
=======================================================================
A:ALA-12>monitor>router#
A:ALA-12>monitor>router# ospf neighbor 10.0.0.104 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for OSPF Neighbor 10.0.0.104
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Bad Nbr States
Bad Seq Nums
Bad Packets
Option Mismatches: 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
Bad Nbr States
Bad Seq Nums
Bad Packets
Option Mismatches: 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Bad Nbr States
Bad Seq Nums
Bad Packets
Option Mismatches: 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Bad Nbr States
Bad Seq Nums
Bad Packets
Option Mismatches: 0
===============================================================================
A:ALA-12>monitor>router#
neighbor
Syntax
neighbor [router-id] [interface-name] [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>router>ospf3
Description
This command displays statistical OSPF or OSPF3 neighbor information at the configured interval
until the configured count is reached. This command applies to the 7750 SR and 7950 XRS.
The first screen displays the current statistics related to the specified OSPF neighbor(s). The
subsequent statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the rate-per-second for each statistic is displayed instead of the
delta.
136
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
LSA not in LSDB
: 0
Nbr Duplicates
: 0
LSA Inst fails
: 0
Bad MTUs
: 0
LSA not in LSDB
: 0
Nbr Duplicates
: 0
LSA Inst fails
: 0
Bad MTUs
: 0
LSA not in LSDB
: 0
Nbr Duplicates
: 0
LSA Inst fails
: 0
Bad MTUs
: 0
LSA not in LSDB
: 0
Nbr Duplicates
: 0
LSA Inst fails
: 0
Bad MTUs
: 0
LSA not in LSDB
: 0
Nbr Duplicates
: 0
Basic System Configuration Guide