Alcatel-Lucent 7450 Basic System Configuration Manual page 159

Context candidate
Description This command displays the candidate configuration along with line numbers that can be used for
editing the candidate configuration.
Parameters
line — Displays the candidate configuration starting at the point indicated by the following
info operational
Syntax info {operational}
Context <root>
Description
In edit-cfg mode, the operational keyword is mandatory when using the info command.
candidate
Syntax candidate
Context show>system
Description
This command shows candidate configuration information.
Output
The following table describes the candidate output fields.
Basic System Configuration Guide
options (the display is not limited to the current CLI context/branch).
Values
line, offset, first, edit-point last
Label
Candidate
configuration state
line Absolute line number.
offset Relative line number to current edit point.
Prefixed with '+' or '-'
first Keyword - first line
edit-point Keyword - current edit point
last Keyword - last line that is not 'exit'
Table 22: Candidate output fields
Description
• empty — Indicates there are no uncommitted changes in the candidate
config.
• modified — Indicates there are uncommitted changes in the candidate
config.
• unconfirmed — Indicates there are no uncommitted changes in the
candidate config but the result of the last commit will be auto-reverted
unless it is confirmed before the timeout expires.
CLI Usage
159