Alcatel-Lucent 7450 Basic System Configuration Manual page 493

Sample Output
A:ALA-1# show system sntp
===============================================================================
SNTP
===============================================================================
SNTP Server
-------------------------------------------------------------------------------
10.10.20.253
===============================================================================
A:ALA-1#
thresholds
Syntax thresholds
Context show>system
Description This command displays system monitoring thresholds. The Threshold Events Log table will keep only
the last 201 entries.
Output
The following table describes system threshold output fields.
Basic System Configuration Guide
Table 52: System SNTP Field Descriptions (Continued)
Label
Version
Preference
Interval
Table 53: System Thresholds Field Descriptions
Label
Variable
Alarm Id
Last Value
Rising Event Id
Threshold
Falling Event Id
Threshold
Description
The SNTP version number, expressed as an integer.
Normal — When more than one time server is configured, one server can
be configured to have preference over another.
Preferred — Indicates that this server has preference over another.
The frequency, in seconds, that the server is queried.
Version Preference
3 Preferred
Description
Displays the variable OID.
Displays the numerical identifier for the alarm.
Displays the last threshold value.
Displays the identifier of the RMON rising event.
Displays the identifier of the RMON rising threshold.
Displays the identifier of the RMON falling event.
Displays the identifier of the RMON falling threshold.
System Management
Interval
64
493