Displaying Directory And File Information - Alcatel-Lucent 7450 Basic System Configuration Manual

CLI Syntax:

Displaying Directory and File Information

Use the dir command to display a list of files on a file system. The type command displays
the contents of a file. The version command displays the version of a *.tim or iom.tim file.
(iom.tim file is used for the XCM on the 7950 XRS).
Use the CLI syntax displayed below to display directory and file information:
CLI Syntax:
The following shows an example of the command syntax:
A:ALA-1>file cf1:\ # dir
Directory of cf1:\
01/01/1980
01/01/1980
08/19/2001
01/01/1980
04/03/2003
01/28/2003
01/28/2003
04/05/2003
A:ALA-1>file cf1:\ # type fred.cfg
# Saved to /cflash1/fred.cfg
# Generated THU FEB 21 01:30:09 2002 UTC
exit all
config
#------------------------------------------
# Chassis Commands
#------------------------------------------
card 2 card-type faste-tx-32
exit
#------------------------------------------
# Interface Commands
#------------------------------------------
# Physical port configuration
interface faste 2/1
exit
interface faste 2/2
exit
Basic System Configuration Guide
file
rd file-url rf
file>
dir [file-url]
type file-url
version file-url
Volume in drive cf1 on slot A has no label.
12:00a
12:00a
02:14p
12:00a
05:32a
05:06a
05:06a
02:20a
15 File(s)
3 Dir(s)
shutdown
mode network
shutdown
7597 test.cfg
957 b.
230110 BOOTROM.SYS
133 NVRAM.DAT
1709 103.ndx
1341 103.cftg.ndx
20754 103.cftg
<DIR> test
338240 bytes.
1097728 bytes free.
File System Management
177