Alcatel-Lucent 7450 Basic System Configuration Manual page 408

System Command Reference
clear-policy-lock
Syntax clear-policy-lock
Context admin
Description
This command allows an authorized administrator to clear an exclusive policy lock. This will reset the
lock flag and end the policy editing session in progress, aborting any policy edits.
debug-save
Syntax debug-save [file-url]
Context admin
Description This command saves existing debug configuration (configuration done under the debug branch of
CLI). Debug configurations are not saved by the admin save command and not preserved across a
node reboot. The debug-save command makes the debug configuration available for the operator to
execute after a reboot by using the exec command, if desired.
Default none
Parameters
file-url — The file URL location to save the debug configuration. If no file-url is specified then
408
the debug configuration is saved at the same location as the standard configuration file
(bof>primary-image/bof>secondary-image/bof>tertiary-image) with the same file name as
the standard configuration file but with a .dbg suffix.
Note: Ipv6-address applies only to the 7750 SR and 7950 XRS.
Values
file url
local-url
remote-url
remote-locn
ipv4-address
ipv6-address
local-url | remote-url: 255 chars max
[cflash-id/][file-path] 200 chars max, including cflash-id
directory length 99 chars max each
[ftp://login:pswd@remote-locn/][file-path]
247 chars max
directory length 99 chars max each
[hostname | ipv4-address | [ipv6-address] ]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
Basic System Configuration Guide