Alcatel-Lucent 7450 Basic System Configuration Manual page 123

-------------------------------------------------------------------------------
Addr FECs Sent
Serv FECs Sent
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
Addr FECs Sent
Serv FECs Sent
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Addr FECs Sent
Serv FECs Sent
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Addr FECs Sent
Serv FECs Sent
===============================================================================
A:ALA-12>monitor>router>ldp#
interface
Syntax interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
rate]
Context monitor>router>mpls
Description
This command displays statistics for MPLS interfaces at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the MPLS interface(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword rate is specified, the rate-per-second for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
interface — Specify IP address of the interface (ip-address) or interface name (ip-int-name). Up
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
Basic System Configuration Guide
: 0
: 1
: 0
: 0
: 0
: 0
: 0
: 0
to 5 interfaces can be specified. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
Default
11 seconds
Values 11 to 60
Default 10
Values
1 to 999
Addr FECs Recv : 0
Serv FECs Recv : 2
Addr FECs Recv : 0
Serv FECs Recv : 0
Addr FECs Recv : 0
Serv FECs Recv : 0
Addr FECs Recv : 0
Serv FECs Recv : 0
CLI Usage
123