Basic CLI Command Reference
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
ipv6
Syntax
ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>cpm-filter
Description
This command displays monitor command statistics for IPv6 filter entries and is supported on the
7750 SR and 7950 XRS.
Parameters
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
mac
Syntax
mac entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>cpm-filter
86
Default
5 seconds
Values
3 to 60
Default
10
Values
1 to 999
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
only.
Values
1 to 65535
Default
5 seconds
Values
3 to 60
Default
10
Values
1 to 999
processing. No calculations are performed on the delta or rate statistics.
instead of the delta.
Basic System Configuration Guide