Alcatel-Lucent 7450 Basic System Configuration Manual page 414

System Command Reference
ts-location
Syntax ts-location file-url
no ts-location
Context config>system>security
Description
The ts-location command is used (along with an automatic system generated file name) when no file-
url parameter is provided for the admin tech-support command. If no ts-location is defined then the
operator must provide a file-url with the admin tech-support command itself.
The directory specified for the ts-location is not auto-created by SR OS. The operator must ensure that
it exists.
Please see the 'admin tech-support' command for more details about the system generated file name.
Parameters
file-url — Specifies the destination directory for auto-named tech-support files (when no file-url
414
remote-locn
ipv4-address
ipv6-address
cflash-id
is specified with the 'admin tech-support' command). The file-url for the ts-location must be
a directory (no filename or extension). The root directory (for example, cf1:\) is blocked for
local compact flash destinations. A sub-directory (for example, cf2:\tech-support) must be
used if local cf is the location.
Values
local-url | remote-url
local-url
remote-url
remote-locn
ipv4-address
ipv6-address
[hostname | ipv4-address | "["ipv6-address"]" ]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|cf3:|cf3-A:|cf3-B:
[cflash-id/][file-path] 200 chars max, including cflash-id
directory length 99 chars max each
[ftp://login:pswd@remote-locn/][file-path]
247 chars max
directory length 99 chars max each
[hostname | ipv4-address | "["ipv6-address"]" ]
a.b.c.d
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
Basic System Configuration Guide