Configuring A Drive Unit - Siemens SINAMICS DCM Operating Instructions Manual

Figure 8-15
⇒ Click Complete to complete the creation of a new project for the drive unit.
8.4.2.2

Configuring a drive unit

In the project navigator, open the tree element that contains your drive unit.
Figure 8-16
⇒ In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign changes into a minus sign and the options for configuring the drive unit appear
as a directory tree under the drive unit.
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619
8.4 Commissioning with the STARTER commissioning tool
Summary
Configuring the project navigator drive unit
Commissioning
219