Notes; Alarm Messages; Operation - Siemens SINAMICS DCM Operating Instructions Manual

Notes

1.1

Alarm messages

Note
In the interests of clarity, these Operating Instructions do not contain full details of all
information for the product and cannot take into account every possible aspect of installation,
operation, or maintenance.
If you require further information, or particular problems arise which these Operating
Instructions do not cover in enough detail, please contact your local Siemens office.
We also draw your attention to the fact that the contents of these Operating Instructions are
not part of and do not modify any prior or existing agreement, commitment, or legal
relationship. Any obligations on the part of Siemens arise from the respective contract of
sale, which also contains the solely valid warranty conditions in full. Any statements
contained in these Operating Instructions neither expand nor restrict the scope of these
contractual warranty conditions.
The unit is at a hazardous voltage. Failure to comply with these Operating Instructions can
lead to death, serious physical injury, and material damage.
Even after all of the supply voltages have been switched-off, a hazardous voltage is
available for 1 min.
Only qualified personnel who are familiar with all the safety instructions provided in these
Operating Instructions, as well as the assembly, operating, and maintenance instructions,
should carry out work on this unit.
There is electrical separation according to the requirements for protection against electric
shock according to EN61800-5-1 at all customer connections with input/output voltages in
the range up to 60 V DC (DVC A).
This is the reason that only components whose inputs/output voltages lie in this range and
which also have electrical separation can be connected at these connections.
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619
WARNING
WARNING
1
17