Siemens SINAMICS DCM Operating Instructions Manual page 229

Control module for variable-speed dc drives

Hide thumbs Also See for SINAMICS DCM:

Table of Contents

Data on field

⇒ Select the behavior of the field control and, if applicable, the field weakening.

If field weakening is activated, the field characteristic curve must be recorded with the

optimization run p50051= 27 on the drive before the drive can be switched on.

⇒ Click Continue >

SINAMICS DCM Control Module

Operating Instructions, 06.2010, C98130-A7067-A1-02-7619

8.4 Commissioning with the STARTER commissioning tool

Data on field

Commissioning