Commissioning
8.4 Commissioning with the STARTER commissioning tool
Summary
Figure 8-29
⇒ Use Copy text to clipboard to insert the summary of the data of your drive unit displayed in
the window for later use in text processing.
⇒ Click Finish.
⇒ Save your project on the hard disk with Project > Save.
8.4.2.3
Starting the drive project
You have generated a project and saved it to your hard disk. The next step is to transfer your
project configuration data to the drive unit.
232
Summary
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619