Open-Loop And Closed-Loop Control Section - Siemens SINAMICS DCM Operating Instructions Manual

Table 6- 11 Assignment of terminals for the electronics power supply
Terminal Function
XP24V
+ 24 V infeed
-
Module C98043-A7109, power interface
6.16.4

Open-loop and closed-loop control section

Table 6- 12 Terminal type, open-loop and closed-loop control section
X177:
Type
Connection capacity
Stripped length
X178, X179:
Type
Connection capacity
Stripped length
XR1, XS1, XT1:
Type
Connection capacity
Stripped length
Tightening torque
X126:
Type
X100, X101:
Type
XB-1... XB-8, X_I_IST, XM:
Type
Connection capacity
Stripped length
XT5, XT6:
Type
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619
6.16 Connector assignment (terminals, Faston mounting tabs, ribbon cables)
Technical data
18 V to 30 V DC; current consumption 1 A ... 5 A
Recommended conductor cross-section 1.5 mm
Internal protection with F200 fuses (6.3 A, time-lag),
External protection 6 A ... 16 A, B or C characteristic
SPT 1.5 spring-loaded terminal
Rigid/flexible/conductor sizes (mm
Flexible with end sleeve without/with plastic sleeve:
0.25-1.5/0.25-0.75 mm (stripped length 8 mm)
2
10 mm
FMC 1.5 plug-in terminal
Rigid/flexible/conductor sizes (mm
Flexible with end sleeve without/with plastic sleeve: 0.25-1.5/0.25-0.75 mm
10 mm
MSTB 2.5/CIF plug-in terminal
Rigid/flexible/conductor sizes (mm
Flexible with end sleeve without/with plastic sleeve: 0.25-2.5/0.25-2.5 mm
7 mm
0.5 - 0.6 Nm
Submin D, 9-pin
Modular jack 8/4 (RJ45)
Wago 256 spring-loaded terminal
0.08 - 2.5 mm , AWG 18-12
2
5 - 6 mm
Faston mounting tabs, 2.8 × 0.8 mm
/mm /AWG): 0.2-1.5 / 0.2-1.5 / 24-16
2 2
/mm /AWG): 0.2-1.5 / 0.2-1.5 / 24-16
2 2
/mm /AWG): 0.2-2.5 / 0.2-2.5 / 24-12
2 2
Connecting
2
2
2
119