Interface Description; Overview; X1400 Ethernet Interface - Siemens SINAMICS DCM Operating Instructions Manual

7.1.3

Interface description

7.1.3.1

Overview

Figure 7-1
MAC address
The MAC address of the Ethernet interface is located on the upper side of the board.
7.1.3.2

X1400 Ethernet interface

Table 7- 1 X1400 Port 1-4
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619
Interface description CBE20
Pin Signal name
1 RX+
2 RX-
3 TX+
4 ---
5 ---
6 TX-
7 ---
8 ---
Screened M_EXT
backshell
7.1 Option Board: Communication Board CBE20
Technical specifications
Receive data +
Receive data -
Transmit data +
Reserved, do not use
Reserved, do not use
Transmit data -
Reserved, do not use
Reserved, do not use
Screen, permanently connected
Additional system components
145