Siemens SINAMICS DCM Operating Instructions Manual page 206

Commissioning
8.3 Commissioning using the AOP30 Operator Panel
p51824
p51825
p51826[0]
p51826[1]
p51829
p51830
p51831
p51832
p51833
p51834
p51835[0]
p51835[1]
p51835[2]
Adjusting the unit/motor
p50076[0]
p50076[1]
p50078[0]
p50078[1]
Acquiring the motor data
The motor data can be taken from the motor rating plate.
Figure 8-4
p50100[d]
p50101[d]
206
Current transformer configuration
Type of power unit
Length of first pulse
Length of other pulses
Heat sink temperature threshold
Sensor for heat sink temperature
Fuse monitoring
Monitoring of unit fan
External fault
Source of fan relay output
Monitoring of unit fan's ON delay
Fault involving unit fan's ON delay
Alarm involving unit fan's ON delay
Rated armature DC current reduction
Rated field DC current adjustment
Rated value for armature supply voltage (in volts)
Rated value for field supply voltage (in volts)
Example of a rating plate
Rated armature current
Rated armature voltage
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619