Siemens SINAMICS DCM Operating Instructions Manual page 28
Control module for variable-speed dc drives
Hide thumbs
Also See for SINAMICS DCM:
- List manual (1205 pages) ,
- Operating instructions manual (715 pages) ,
- Manual (705 pages)
Table of Contents
Advertisement
Ordering information
2.3 Ordering information for options and accessories
Product description
Prefabricated bridge set for
voltage measurement
Prefabricated bridge set for
controlling firing pulse
transformers
Prefabricated bridge set for
controlling firing pulse
transformers
Prefabricated bridge set for
mounting plates next to each
other
28
Contents
1 x 3-pin twisted U-V-W cable
(L = 3 m)
1 x 2-pin twisted C-D cable (L
= 3 m)
12 x 2-pin twisted cables (L =
1 m)
2 x 12-pin shielded cables (L =
10 m)
2 x 26-pin ribbon cables,
shielded (L = 0.68 m)
1 x 10-pin ribbon cable,
shielded (L = 0.5 m)
1 x 20-pin ribbon cable,
shielded (L = 0.76 m)
1 x RJ45 patch cable, shielded
(L = 1 m)
For connecting
XU6, XV6, XW6
or XU5, XV5, XW5
or XU4, XV4, XW4
or XU3, XV3, XW3
or XU2, XV2, XW2
or XU1, XV1, XW1
depending on the voltage (5.6 V,
50 V, 125 V, 250 V, 575 V, or
1,000 V) to the supply
XC6, XD6 or XC5, XD5 or XC4,
XD4 or XC3, XD3 or XC2, XD2 or
XC1, XD1 depending on the
voltage (5.6 V, 50 V, 125 V,
250 V, 575 V, or 1,000 V) to the
supply
XIMP1, XIMP4 or XIMP2, XIMP5
or XIMP3, XIMP6 on PCB -
A7043- (side sections) to firing
pulse transformer modules
(single boards) with terminals
X11, X12, X13, X14, X15, X16,
X21, X22, X23, X24, X25, X26
XIMP1, XIMP4 and/or XIMP2,
XIMP5 and/or XIMP3, XIMP6 on
PCB -A7043- to external firing
pulse transformers
X21A, X22A on PCB -A7109-
to X21A, X22A on PCB -A7043-
X23B on PCB -A7109-
to X23B on PCB -A7118-
XF1 on PCB -A7109-
to XF1 on PCB -A7116-
X45 on PCB -A7109-
to X45 on PCB -A7117-
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619
Order no.
6RY1807-0CM08
6RY1707-0CM13
6RY1707-0CM10
6RY1807-0CM11
SINAMICS DCM Control Module
Advertisement
Table of Contents
