Siemens SINAMICS DCM Operating Instructions Manual page 218

Commissioning
8.4 Commissioning with the STARTER commissioning tool
Bus address:
Name:
Note
A second CUD for expanding the computing capacity is created in the STARTER as an
independent device, type "Sinamics DCM Standard (Advanced) CUD [2]".
Explanation: "[2]" is the SINAMICS nomenclature for indexed data. In this case, it is used as
a name - independent of any language for a second CUD inserted in the right-hand slot.
⇒ Click Insert
The selected drive unit is displayed in the project wizard preview window.
Figure 8-14
⇒ Click Continue >
A summary of the project is displayed.
218
The corresponding drive bus address (the default is 126)
Any desired name can be entered in the name box
Inserting a drive unit
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619