Siemens SINAMICS DCM Operating Instructions Manual page 233

Transferring a STARTER project to the drive unit
The following steps are required to transfer the STARTER project created offline to the drive
unit:
Step
If the following screen appears after step 1, select the Download to target device menu
command and continue with step 3. Otherwise, continue with step 2.
Figure 8-30
Step
SINAMICS DCM Control Module
Operating Instructions, 06.2010, C98130-A7067-A1-02-7619
1 Select the menu command
Project > Connect to target system
Online/offline comparison
2 Select the menu command
Target system > Download > Project to target system
8.4 Commissioning with the STARTER commissioning tool
Commissioning
Selection in the
toolbar
Selection in the
toolbar
233