Control Units Cu230P - Siemens CU230P-2 HVAC Parameter Manual

Unit
Indicates the unit of measure applicable to the parameter values.
Min
Indicates the minimum value to which the parameter can be set.
Max
Indicates the maximum value to which the parameter can be set.
Factory setting
Indicates the default value, i.e. the value which applies if the user does not specify
a particular value for the parameter (see also "Calculated").
Description
Explanation of the function of a parameter.
Values
Lists the possible values of a parameter.
Index
The name and meaning of each individual index is specified for indexed para-
meters, except indexed parameters which belong to a data set (see "Data Set").
Bit field
For parameters with bit fields, the following information is provided about each bit:
 Bit number and signal name
 Meaning with signal states 0 and 1
 Function diagram (optional). The signal is shown on this function diagram.
Dependency
Conditions which need to be fulfilled in connection with this parameter. Also
includes special effects which can occur between this parameter and others.
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Parameters
Introduction to Parameters
1-13