Siemens CU230P-2 HVAC Parameter Manual page 235

r2050[0...7] CO: PROFIBUS PZD receive word / PZD recv word
Access level: 3
Unit: -
Description: Connector output to interconnect PZD (setpoints) with word format received from the fieldbus master.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
p2051[0...7] CI: PROFIdrive PZD send word / PZD send word
CU230P-2 CAN Access level: 3
CU230P-2 HVAC
Can be changed: U, T
Min
-
Description: Selects the PZD (actual values) with word format to be sent to the fieldbus master.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
p2051[0...7] CI: PROFIdrive PZD send word / PZD send word
CU230P-2 DP Access level: 3
Can be changed: U, T
Min
-
Description: Selects the PZD (actual values) with word format to be sent to the fieldbus master.
Index: [0] = PZD 1
[1] = PZD 2
[2] = PZD 3
[3] = PZD 4
[4] = PZD 5
[5] = PZD 6
[6] = PZD 7
[7] = PZD 8
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Calculated: -
Scaling: 4000H
Calculated: -
Scaling: 4000H
Max
-
Calculated: -
Scaling: 4000H
Max
-
Parameters
List of Parameters
Data type: Integer16
Data set: -
Data type: U32 / Integer16
Data set: -
Factory setting
0
Data type: U32 / Integer16
Data set: -
Factory setting
2089[0]
1-235