Siemens CU230P-2 HVAC Parameter Manual page 364

Parameters
List of Parameters
r20119[0...2] CO: DIV 0 quotient / DIV 0 quotient
Access level: 3
Unit: -
Description: Display parameter for quotients Y = X1/X2, integer number quotients YIN, and division remainder MOD = (Y - YIN)
x X2 of instance DIV 0 of the divider.
Index: [0] = Quotient Y
[1] = Integer number quotient YIN
[2] = Div remainder MOD
r20120 BO: DIV 0 divisor is zero QF / DIV 0 divisor=0 QF
Access level: 3
Unit: -
Description: Display parameter for the signal QF that the divisor X2 of instance DIV 0 of the divider is zero.
X2 = 0.0 => QF = 1
p20121 DIV 0 run-time group / DIV 0 RTG
Access level: 3
Can be changed: T
Min
5
Description: Setting parameter for the run-time group in which instance DIV 0 of the divider is to be called.
Value: 5:
6:
9999: Do not calculate
p20122 DIV 0 run sequence / DIV 0 RunSeq
Access level: 3
Can be changed: T
Min
0
Description: Setting parameter for the run sequence of instance DIV 0 within the run-time group set in p20121.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20123[0...1] CI: DIV 1 inputs / DIV 1 inputs
Access level: 3
Can be changed: T
Min
-
Description: Sets the signal source of dividend X1 and divisor X2 of instance DIV 1 of the divider.
Index: [0] = Dividend X1
[1] = Divisor X2
r20124[0...2] CO: DIV 1 quotient / DIV 1 quotient
Access level: 3
Unit: -
Description: Display parameter for quotients Y = X1/X2, integer number quotients YIN, and division remainder MOD = (Y - YIN)
x X2 of instance DIV 1 of the divider.
Index: [0] = Quotient Y
[1] = Integer number quotient YIN
[2] = Div remainder MOD
1-364
Run-time group 5
Run-time group 6
Calculated: -
Scaling: PERCENT
Calculated: -
Scaling: -
Calculated: -
Scaling: -
Max
9999
Calculated: -
Scaling: -
Max
32000
Calculated: -
Scaling: PERCENT
Max
-
Calculated: -
Scaling: PERCENT
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Data type: FloatingPoint32
Data set: -
Data type: Unsigned32
Data set: -
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
300
Data type: U32 / FloatingPoint32
Data set: -
Factory setting
0
Data type: FloatingPoint32
Data set: -
© Siemens AG 2009 All Rights Reserved