Siemens CU230P-2 HVAC Parameter Manual page 372

Parameters
List of Parameters
p20171 PDF 0 run-time group / PDF 0 RTG
Access level: 3
Can be changed: T
Min
5
Description: Setting parameter for the run-time group in which the instance PDF 0 of the breaking delay device is to be called.
Value: 5:
6:
9999: Do not calculate
p20172 PDF 0 run sequence / PDF 0 RunSeq
Access level: 3
Can be changed: T
Min
0
Description: Setting parameter for the run sequence of instance PDF 0 within the run-time group set in p20171.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20173 BI: PDF 1 input pulse I / PDF 1 inp_pulse I
Access level: 3
Can be changed: T
Min
-
Description: Sets the signal source for the input pulse I of instance PDF 1 of the breaking delay device.
p20174 PDF 1 pulse extension time in ms / PDF 1 t_ext ms
Access level: 3
Can be changed: T
Min
0.00
Description: Setting parameter for pulse extension time T in milliseconds of instance PDF 1 of the breaking delay device.
r20175 BO: PDF 1 output Q / PDF 1 output Q
Access level: 3
Unit: -
Description: Display parameter for output pulse Q of instance PDF 1 of the breaking delay device.
p20176 PDF 1 run-time group / PDF 1 RTG
Access level: 3
Can be changed: T
Min
5
Description: Setting parameter for the run-time group in which the instance PDF 1 of the breaking delay device is to be called.
Value: 5:
6:
9999: Do not calculate
1-372
Run-time group 5
Run-time group 6
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Max
9999
Calculated: -
Scaling: -
Max
32000
Calculated: -
Scaling: -
Max
-
Calculated: -
Scaling: -
Max
60000.00
Calculated: -
Scaling: -
Calculated: -
Scaling: -
Max
9999
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
460
Data type: U32 / Binary
Data set: -
Factory setting
0
Data type: FloatingPoint32
Data set: -
Factory setting
0.00
Data type: Unsigned32
Data set: -
Data type: Integer16
Data set: -
Factory setting
9999
© Siemens AG 2009 All Rights Reserved