Siemens CU230P-2 HVAC Parameter Manual page 351

p20045 AND 3 run sequence / AND 3 RunSeq
Access level: 3
Can be changed: T
Min
0
Description: Setting parameter for the run sequence of instance AND 3 within the run-time group set in p20044.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20046[0...3] BI: OR 0 inputs / OR 0 inputs
Access level: 3
Can be changed: T
Min
-
Description: Sets the signal source of input quantities I0, I1, I2, I3 of instance OR 0 of the OR function block.
Index: [0] = Input I0
[1] = Input I1
[2] = Input I2
[3] = Input I3
r20047 BO: OR 0 output Q / OR 0 output Q
Access level: 3
Unit: -
Description: Display parameter for binary quantity Q = I0 | I1 | I2 | I3 of instance OR 0 of the OR function block.
p20048 OR 0 run-time group / OR 0 RTG
Access level: 3
Can be changed: T
Min
1
Description: Setting parameter for the run-time group in which the instance OR 0 of the OR function block is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20049 OR 0 run sequence / OR 0 RunSeq
Access level: 3
Can be changed: T
Min
0
Description: Setting parameter for the run sequence of instance OR 0 within the run-time group set in p20048.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Max
32000
Calculated: -
Scaling: -
Max
-
Calculated: -
Scaling: -
Calculated: -
Scaling: -
Max
9999
Calculated: -
Scaling: -
Max
32000
Parameters
List of Parameters
Data type: Unsigned16
Data set: -
Factory setting
40
Data type: U32 / Binary
Data set: -
Factory setting
0
Data type: Unsigned32
Data set: -
Data type: Integer16
Data set: -
Factory setting
9999
Data type: Unsigned16
Data set: -
Factory setting
60
1-351